BAILII is celebrating 24 years of free online access to the law! Would you consider making a contribution?
No donation is too small. If every visitor before 31 December gives just £1, it will have a significant impact on BAILII's ability to continue providing free access to the law.
Thank you very much for your support!
[Home] [Databases] [World Law] [Multidatabase Search] [Help] [Feedback] | ||
England and Wales Lands Tribunal |
||
You are here: BAILII >> Databases >> England and Wales Lands Tribunal >> Evans (Valuation Officer) [2003] EWLands RA_10_2002 (21 March 2003) URL: http://www.bailii.org/ew/cases/EWLands/2003/RA_10_2002.html Cite as: [2003] EWLands RA_10_2002 |
[New search] [Printable RTF version] [Help]
[2003] EWLands RA_10_2002 (21 March 2003)
RA/10/2002
LANDS TRIBUNAL ACT 1949
General Rate Act, 1967, s.115(1) – Meaning of hereditament – Non-contiguous properties in single occupation – structurally and geographically separated – Functional connection insufficient to justify finding single hereditament
IN THE MATTER of an APPEAL against the DECISION of the
EAST YORKSHIRE VALUATION Tribunal
by
JOHN PHILIPS EVANS
(Valuation Officer)
Re: (1) Workshop & Premises
Unit 2, Anchor Trading Park
Wiltshire Road,
Hull HU4 6PQ
(2) Factory & Premises,
RLM Packaging, Wiltshire Road
Hull H4 6HP
Before: Judge Michael Rich QC
Sitting at: 48/49 Chancery Lane, London WC2A 1JR
on 20 March 2003
The following cases are referred to in this decision:
Butterley Co Ltd v Tasker (1961) 7 RRL 2
Edwards (VO) v B P Refinery (Llandarsey) Ltd [1974] RA 1
Gilbert v Hickinbottom [1956] 2 QB 40
Harris Graphics Ltd v Williams (VO) [1989] RA 211
F Smales and Son Ltd appeal to East Yorkshire Valuation Tribunal (14 March 2001)
DECISION
"a hereditament is anything which by virtue of section 115 subsection 1 of the 1967 Act would have been a hereditament for the purposes of that Act …"
By section 115 of the General Rate Act 1967:
" 'hereditament' means property which is or may become liable to a rate, being a unit of such property which is, or would fall to be, shown as a separate item in the valuation list."
The Valuation Tribunal thus had to apply the law as to whether properties would fall to be shown as one unit or two units, as established for the purposes of the 1967 Act.
"If in one occupation there are several buildings capable of being separately let, which are not within a common enclosure or curtilage but which are physically separated, and are interspersed among other buildings and other occupations, in such circumstances it would hardly be possible to regard them as comprising one hereditament, even though they were all used for a common purpose. The mere fact of a community of use or purpose would almost certainly in such case, in view of the other circumstances (such as the structure or geographical separation of the buildings, their dispersion among other buildings, and their capability of being separately let) be held not be sufficient to warrant buildings being considered as one hereditament."
Nevertheless, the Valuation Tribunal came to the conclusion that
"the degree of functional connection between the two properties is so great that this factor overrides the geographical separation between the properties and also the intervening separate occupation in between".
Although I find that conclusion as surprising as did Denning LJ the decision of the Lands Tribunal the subject of the appeal in Gilbert's case, I do not think that it can be said to involve an error of law anymore than the Lands Tribunal's decision in Gilbert's case involved such error. The appeal to the Lands Tribunal from the Valuation Tribunal is however by way of rehearing, and my decision accordingly must be based on the facts as agreed or proved before me.
"The appeal hereditaments consist of:
The Main Factory
a. a 1970s detached portal frame factory building of 1100 sq m constructed of block and profiled steel cladding under a pitched and lined asbestos covered roof with PVC roof lights. The property has a concrete floor a front external canopy and access is via a roller shutter door. The property has gas warm air heating, electric lighting and power main water and drainage. The eaves height is of asymmetric pitch of 3.5 metres and 2.5 metres approximately. The ridge is 4m in height. The yard is surfaced and drained and enclosed by steel fencing with 2 sets of double gates. The property is situated and known as RLM Packaging Limited, Wiltshire Road, Hull HU4 6HP; and
Unit 2
b. a 1920s/1930s factory building 259.3 sq m of traditional brick construction and is formed from a larger industrial building previously occupied by the Metal Box company Ltd. It has a mono pitched lattice trussed roof covered with asbestos sheeting. The property has a concrete floor, a front external canopy and access is via a roller shutter door. The property has electric lighting and power mains water and drainage, but no heating. The eaves height is 5.2 metres approximately. The property is situated and known as Unit 2 Anchor Trading Park, Wiltshire Road, Hull HU4 6PQ and is accessed by what I understand to be a narrow private roadway;
There are at least 3 intervening hereditaments – taken 'as the crow flies'. If taken along the estate road, goods exit to goods entrance, then there are 7 intervening properties. The distances involved are approximately 250m – 'as the crow flies' and 380m – when measured along the road, goods exit to goods entrance including the private roadway leading to unit 2 of 55 metres. The figures used at the valuation tribunal were 325m and 30m but the latter figure must now be regarded as incorrect.
Occupation and Use of the Premises
A letter from Rogerson Associates dated 17th August 2001 outlines the position with regard to the manufacturing process and staffing movements. A copy is shown at exhibit JPE 5.
'Staff – The planning and management of the press shop (Unit 2) is controlled from the main factory. There are currently 24 direct operatives and they are split between the 2 sites. They are transferred from one site to the other depending on the skills required and at time this can require more than 3 or 4 transfers a day of the same people. RLM Packaging employ a van for 90% of the time and a forklift driver for 50% of the time to run between the 2 sites.'
'Manufacturing Process – Tin plate is brought into the main factory where it is cut and transferred by van to the press shop (unit 2), this tin plate is then formed into components. Part of this process can involve a split where some of the operations are done at the main factory and again returned for completion at the press department. A very good example of this are the hydraulic brake tanks, which during manufacture can be transferred 3 or 4 times during their manufacturing cycle. There are other examples such as gas masks sysemic containers and the lids that are manufactured for all containers.' "
That letter continued as follows:
"All despatches are from the Main Factory, which includes all the items from the workshop. To quote from RLM Packaging 'we as a business would much prefer the two sites under one roof due to the dependency of one to the other. One site could not operate without the other'".
The Valuation Officer does not dispute what is there written at least to the extent that Unit 2 could not operate without the Main Factory. The Main Factory however, whilst needing the use of the pressing machine housed in Unit 2, could operate if such facility were housed elsewhere than in Unit 2, as it now does and did before Unit 2 was acquired.
"There are essentially 4 production lines at the Main Factory. They consist of Line '1', Line '3', Line 'C' and Line 'D'. The lines make a range of pails and metal containers but Line 3 is more concerned with short run orders and the specialist items such as brake cylinders and gas masks.
Unit 2 is solely concerned with the manufacture of canister tops, rings and ends. The tinplate for these arrives at the Main Factory and is unpacked and cut into strips before being transported by van (with fork lift truck assistance) to unit 2. At unit 2 the strips are pressed into the shape and size to form the appropriate lid/top, ring or end.
The lids or tops are then packaged and returned by van with forklift assistance to the Main Factory for dispatch. The lids/tops are supplied to the client separately packaged from the matching container."
Although the ratepayer has not agreed this part of the draft statement Mr Evans confirmed it in evidence before the Tribunal, and I accept it subject to the observation of the ratepayer that some components have to go to the press department in Unit 2 more than once.
"Consideration of these two cases leads us to the conclusion that two separate properties which are not directly and physically contiguous could not properly be regarded as a single hereditament for rating purposes unless firstly, there is an essential functional link between the two parts and secondly, that there is also a substantial degree of propinquity. One might perhaps consider the analogy of a sparking plug where the gap between the parts is so small that it can physically be traversed in the course of the functioning of the whole. It might also be true to say that the stronger the spark the greater the gap which can be traversed."
I adopt that useful analogy.
"There is a regular to and fro traffic of personnel for the purpose of transporting materials by hand, or transporting and assembling by hand, the to and fro traffic of personnel concerned with supervising , checking and testing of the machines being assembled. There is the to and fro traffic of trolleys carrying materials, and forklift trucks carrying part assembled machines. The distance to be covered is not great but it is possible to use the service road for this purpose."
Dated 21 March 2003
(Signed) His Honour Judge Michael Rich QC